Synchronize of Pen Drive without install

Many of us have to work at different computers and Synchronize of Pen Drive with computers are essential. To prevent data loss by accident Synchronize of Pen Drive is a must. It would be better if one get a software to Synchronize of Pen Drive without install.
If you are looking for a software to Synchronize of Pen Drive without install, I must recommend DirSync pro. DirSync pro is a free a software to Synchronize of Pen Drive without install.
To learn more about it or download it go to
http://www.dirsyncpro.org/index.html

Another software to Synchronize of Pen Drive without install is OzSync.
To learn more about OzSync go to
http://nebula1979.fortunecity.it/

Best thing about both the software is that they do not need to be installed and can be ran from the pen drive. Hence you can use it from your pen drive when you are working in as limited user of operating software (windows/linux).

Online converaion of rar files

Not every computer will have a rar extractor application installed. When you use such a computer, one of the alternatives you can use is to unrar rar file online. Wobzip is one of the online file extraction services you can use for free. Beside rar, it also supports a number of other archive formats.

The archive formats supported: 7z, ZIP, GZIP, BZIP2, TAR, RAR, CAB, ISO, ARJ, LZHCHM, Z, CPIO, RPM, DEB and NSIS.

One thing to keep in mind when you use an online application instead of a desktop program is the size limitation. 100 MB is the maximum file size allowed when you use Wobzip.

Features:
Free.
No registration required.
Support a number of archive formats.
Support password-protected rar archives.
Unrar rar file from your computer or instantly from an URL.
Bitdefender Anti Virus is used to scan your rar file.
Visit Wobzip to unrar rar file online for free

via online rar extractor



Read more: http://www.wargeek.net/unrar-rar-file-online-free.html#ixzz13oKoY5Q2

Free talking (pronunciation) dictionaries to download

Talking dictionary is not a freeware. You’ll have to pay for it. There are few free talking (pronunciation) dictionaries. You can use these free talking (pronunciation) dictionaries as an alternative to Talking dictionary. These free talking (pronunciation) dictionaries are usable offline. Moreover, they could be used with many of the software.

Free talking (pronunciation) dictionaries that I could found are:-
1. WordWeb
2. Lingoes

WordWeb also has a Pro version, but you’ll have to pay for it.
For more information and download WordWeb, Click here.

For more information and download Lingoes, Click here.
Hope you find free talking (pronunciation) dictionaries to download usable.

How to identify a music song not by lyrics, but by sound

You know, you can find songs from music, not by lyrics. Click here to learn more.

Repeated scanning of a drive during startup

Hello, what you're experiencing is what Windows refers to as "setting the dirty bit" and what you have to do is unset that bit. Every time Windows XP starts, autochk.exe is called by the kernel to scan all volumes to check if the volume dirty bit is set. If the dirty bit is set, autochk performs an immediate chkdsk /f on that volume. Chkdsk /f verifies file system integrity and attempts to fix any problems with the volume. It is usually caused by a hard shut down or a power loss during a read-right operation on that particular drive.

How do I fix it, you ask?

Well, that's easy. First click Start> Run> bring up a command prompt by typing in "CMD" and type " fsutil dirty query d: ". This queries the drive, and more than likely it will tell you that it is dirty. Next, type "CHKNTFS /X D:". The X tells Windows to NOT check that particular drive on the next reboot. At this time, manually reboot your computer, it should not do a Chkdsk and take you directly to Windows.

Once Windows has fully loaded, bring up another CMD prompt and type and now you want to do a Chkdsk manually by typing "Chkdsk /f /r d:". This should take you through 5 stages of the scan and will unset that dirty bit. Finally, type "fsutil dirty query d:" and Windows will confirm that the dirty bit is not set on that drive. Good luck!

This information was found at

http://forums.cnet.com/5208-10149_102-0.html?threadID=113089

Sharing programs with limited user account in windows XP

Those who use windows XP, may regularly use user with limited account to avoid virus infection. But that brings a problem. Sharing programs with limited user account in windows XP may not be available with all the programs. Here what you can do for sharing programs with limited user account in windows XP.

Go to user account with administrative power. Open the program folder in "Program files" and copy the .exe file and pest it to "Shared document" folder in the folder named "Documents and settings"

Now you should be able to sharing programs with limited user account in windows XP.

Find duplicate files

Many of the time too many duplicate files acquire a lot of space in the hard drive. Sometimes they are so much that you need to find duplicate files and remove them. A good freeware software to find duplicate files is Duplicate File Searcher. To find duplicate files, you don't need to install it. No matter if you run windows, linux or solaris, if you have Java Runtime Environment installed in your computer, you'll be able to run it.

For installing Java Click here

If you have java installed all you have to do to find duplicate files is go to the following link and download the software.

http://duplicatefilessearcher.net/

Unzip it and run "dfsfull.jar"

Now you should be able to search and find duplicate files.

Changing .pps to .ppt

Changing .pps to .ppt (power point slide show to power point template) is not so difficult. But it is necessary in some instances and at that time we don't know the procedure of changing .pps to .ppt.

In the windows you can be changing .pps to .ppt and vice versa following these steps:

1. Change the settings to view all file extension types. (In Windows Explorer, Tools > Folder Options > View tab and unchecck the “Hide extensions for known file types” )

2. Just rename the files with .ppt extension. instead of pps extension. ABC.pps -to ABC.ppt

3. Now you can make changes and edits to the show. You can also do the reverse too, make a ppt into a pps just by changing the extension.

In ubuntu the extension should be visible and editable already.

To learn more about .ppt you can visit wikipedia.

Changing MAC address of LAN card in Ubuntu

Changing MAC address of LAN card in Ubuntu may be necessary under certain conditions. By changing MAC address of LAN card in Ubuntu you can access the network that recognize computers through their MAC address. Changing MAC address of LAN card in Ubuntu is easy. But the easiest way is temporary also. There are several ways that you can change MAC address of LAN card in Ubuntu. I am discussing few of them.

First method:

This is the easiest of the methods for changing MAC address of LAN card in Ubuntu. But you have to do it every time you reboot.
Go to the terminal and write (it will turn off your card and change MAC address):

sudo ifconfig eth0 down hw ether XX:XX:XX:XX:XX:XX

Here X will be replaced by your desired MAC number.

Then write in the terminal (it will start your card again):

sudo ifconfig eth0 up

Changing MAC address of LAN card in Ubuntu is done (but temporarily).




Second method:

In this method, you will need to edit 'interfaces' file.
For changing MAC address of LAN card in Ubuntu by this method, you'll have to go to terminal and write:

sudo gedit /etc/network/interfaces

And paste in this file the following lines (I think the first two lines are already there):

auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
hwaddress ether XX:XX:XX:XX:XX:XX


Again X would be replaced by the MAC numbers of your LAN card.




Third method:

I have tried this and I know this works for changing MAC address of LAN card in Ubuntu.
I have got this from another website.

Open terminal and type as follow:

$ ifconfig

$ cd /etc/init.d

$ sudo nano ChangeMAC

The editing area is opened for editing. Now fill configuration file with new MAC Address.

sudo ifconfig eth1 down
sudo ifconfig eth1 hw ether xx:xx:xx:xx:xx:xx
sudo ifconfig eth1 up
sudo /etc/init.d/networking stop
sudo /etc/ini.d/networking restart

Save and close the file

Apply configuration file.

$ sudo chmod +x ChangeMAC

$ sudo update-rc.d ChangeMAC defaults

Restart machine.
That should be enough for changing MAC address of LAN card in Ubuntu.


To know more about changing MAC address in other operating softwares you can visit this website

To know more about MAC address you can go to this website also.


Hope you find the information helpful and enjoy changing MAC address of LAN card in Ubuntu.

Ubuntu 10.04 network problem

I downloaded desktop version of Ubuntu 10.04 and installed to my desktop. I could not connect to wired internet. I set up the TCP/IP from edit connection in the tab ‘IPV4’. Still could not connect to wired network.
Finally the wired network in Ubuntu 10.04 worked when I went to edit connection -> wired connections -> IPV6 and changed the setting in ‘Method’ to ‘Ignore’.
Now I am surfing the net from Ubuntu 10.04 using wired network.

Dictation software windows

Dictation software is something by which you can write in the computer directly using your voice. Dictation software's are not very much common. Though office XP has built in dictation software there is nothing for Linux. another software that you can use for dictating the computer is Dragonbar. You have to pay for dragonbar. so it is better to use office XP for dictation. one
Now, let us see how we can use office XP for dictation. Run your MS Word and go to "tools" menu and select "speech". The rest would be taken care by the software. You will have to only follow the instructions.
After finishing the training of the software you should be able to use the dictation software by yourself. All you have to do is the dictation button from the microphone menu.
Good luck with your dictating and using the dictation software.

How to make the background of icon text transparent

One of the XP’s feature is that it can make the background of icon text transparent. Though making background of icon text transparent is easy, there are some unexpected measures which one have to take to make his background of icon text transparent. To background of icon text transparent

1. Click on "Start"
2. Choose "Control Panel"
3. Click on "System Icon"
4. Choose the "Advanced" tab, click "Settings" under "Performance"
5. Under the "Visual Effects" tab I Chose (checked) Use Drop Shadows for Icon Labels"

OR
1. Click "Start", and then click "Control Panel".
2. Click "Performance and Maintenance", and then click "System".
3. On the "Advanced" tab, click "Settings" under "Performance".
4. Click to clear the "Use drop shadows for icon labels on the desktop" check box, click "Apply", and then click "OK" two times.
5. Close Control Panel

If your background of icon text is transparent, its fine. But if it is not you should make sure the following things.

a) "Right-click" on Desktop -> Arrange Icons by -> "Lock Web items" must be cleared (uncheked).

b) If you have any web content on your desktop, transparency won't work. To check for web content:

Control panel -> Display Properties -> Desktop -> Customize -> Desktop ->Web
Now make sure all checkboxes are clear.

c) Wallpaper must be an image file, not html.

Now you should have your background of icon text transparent.

Defragment windows

I faced a problem with windows XP. It scanned my 'F' drive every time I start windows. I tried to run defragmenter and defragment the drive from the start menu. But it showed some warning that it is scheduled for some scan and degragmentation can not be done.
I managed for force defragment the drive through command prompt. If you want to defragment a drive you can try this method.

Start → Command → defrag X: (here X= desired drive)

If you want to analyze of force defragment, write “defrag /?” and hit enter. Then follow the instructions.

Refill canon 1800 cartridges

Click on the title and go to the link to know the refill procedure of cartridges to canon 1800.
These includes PG-40 and CL-41.

In brief, to refill canon 1800 cartridges, you'll have to remove the sticker over the grayish surface. You'll find three points. make a hole in the point to refill canon 1800 cartridges. Put a needle of the syringe filled with appropriate a color for the hole and fill it. You must put appropriate color to refill canon 1800 cartridges. Follow the instruction and images by clicking the title to refill canon 1800 cartridges.